10 Troubleshooting; Technical Data - Derungs D VISIANO 10-1 P S10 Mode D'emploi

10 TROUBLESHOOTING

Fault
Luminaire not working
Luminaire not working
Luminaire not working
Luminaire will not stay in po-
sition
11

TECHNICAL DATA

Electrical Data:
Rated input voltage
Frequency range
Power consumption
Input current
Power factor
Photometric values:
Central illuminance Ec at 0.5 m distance
Light field diameter d10 at 0.5 m distance
Light field diameter d50 at 0.5 m distance
Color temperature
Color rendering Index Ra
Color rendering Index R9
Ambient conditions for transport, storage and operation:
Total irradiance Ee at max. intensity
Ambient temperature (storage and transport)
Ambient temperature (operation)
Rel. humidity (non-condensing) (storage and transport)
Rel. humidity (non-condensing) (operation)
Weight:
Visiano 10-1 P S10
Operating mode:
Operating mode
Classification:
Visiano 10 -1 P S10
Degree of protection according to IEC 60529
Classification according to 93/42 ECC – Annex IX (Medical Device Class)
Classification according to 93/42 ECC – Annex IX (Medical Device Class)
Electrical safety testing and EMC according to:
Blue light hazard according to EN/IEC 62471
Life cycle of the light source:
Life cycle of LED
Possible cause
Contact fault
No mains voltage
LED module defective
Foot joint does not have
enough friction
Troubleshooting
Switch on again
Check voltage, check all connec-
tions
Contact manufacturer's service dept. Only by manufacturer's
Adjust the foot joint until desired fric-
tion has been achieved (1.25 Nm).
User profile
All
Qualified Electrician
service dept.
Qualified Specialist
100-240V AC
50/60 Hz
10.5-13 W (11.2-17 VA)
0.08-0.12 A
0.76
50,000 lx *
Ø = 18 cm
Ø = 10 cm
4400K *
> 93
> 90
2
< 210 W/m ( * -10% / +20% Tol.)
20°C to +70°C
+10°C to +35°C
max. 90%
max. 75%
1.1 kg
Continuous operation
Protection class II
IIP 20
Class I
Class I
EN/IEC 60601-1
EN/IEC 60601-2-41
EN/IEC 60601-1-2
RG 1 (low risk)
50,000 h (L70/B50)
15