TESTO Smart Probes Manuel De Mise En Service page 8

5 LED status
5 LED status
LED status
Flashing red
Flashing yellow
Flashing green
6 Transmitting reading
✓ The Smart Probes are switched on and connected to their mobile
terminal via Bluetooth.
1. The Smart Probes' readings are automatically shown in the standard
display.
2. Press the key.
- The reading that is currently present is held.
3. Press the key again.
- The instrument again displays the current readings.
These commissioning instructions describe the basic operating
steps.
To find out how to handle the product safely and for detailed
information, please refer to the instruction manual at:
www.testo.com/download-center
8
Meaning
Low battery status
• Smart Probe is switched on.
• Smart Probe searching, but not yet connected.
• Smart Probe is switched on.
• Bluetooth is connected.