Publicité
Les langues disponibles
Les langues disponibles
When driving with a trailer, observe the driving instructions in the vehicle manufacturer's
operating instructions.
The trailer must be equipped with an appropriate towing coupling ball.
If installing the towing bracket necessitates the removal of the towing eye, the towing bracket
serves as a replacement, provided the permissible towed weight is not exceeded and the towing
takes place on normal roads.
The fixing points specified as standard must be observed.
National guidelines concerning official approval of auxiliaries must be observed.
These installation and operating instructions must be enclosed with the vehicle papers.
General Installation Instructions:
If present, remove insulating compound and/or underseal in the area of the towing bracket
contact surfaces. Coat bare bodywork with anti-corrosion paint.
Mount 7-pin electrical system as per DINV 72570.
Mount 13-pin electrical system as per ISO 11446.
Retighten all mounting bolts of the towing bracket after approx. 1,000 towing km.
This towing bracket including all mounting parts weighs 21 kg. Please take into account that the
curb weight of your vehicle is increased by this amount after mounting the towing bracket.
Available Spare Parts for Towing bracket
Spare Part No.
913 056 650 001
Description
Securing component
GB
7
Publicité
