Before First Use; Charging The Appliance; Assembly/Disassembly; Connecting The Hand Element To The Handle/Removal From Handle - SilverCrest SHSS 12 C2 Mode D'emploi

Before first use
NOTE
► This appliance is supplied with non-charged
batteries. The batteries must be charged for
6 hours before the first use.
■ Remove all packaging materials and protective
stickers from the appliance, especially the pro-
GB
tective sticker on the contacts on the back of the
hand element
■ Place the cradle
cradle clicks into place.

Charging the appliance

NOTE
► Ensure that the appliance is switched off
before starting to charge the batteries.
■ To charge the appliance, connect the charger
to a mains socket and insert the barrel jack
into the charging socket
Feed the cable through the cable channel on the
charging socket
resting on the cable.
■ Place the handle with the attached hand element
onto the cradle
The red control lamp
When the appliance is fully charged, the indicator
light illuminates green.
26
.
on the stand so that the
on the cradle
, so that the cradle
.
illuminates.

Assembly/disassembly

Connecting the hand element to the
handle/removal from handle
.
is not
Fig. 1
■ To connect the hand element
push the tip of the hand element
opening in the hand element recess
■ Then press the grip
into the handle so that the hand element
clicks firmly into position (Fig. 1).
■ To remove the hand element
press the "Hand element" release
■ Then pull the hand element
forwards out of the hand element recess
(Fig. 2).
Fig. 2
to the handle,
into the
.
of the hand element
from the handle,
.
upwards and
SHSS 12 C2