Table des Matières
Publicité
Machine number
(bearing position):
Nature of analysis:
Shelf life/Quality
Grease performance
Contamination expected
Collecting sample (Refer to chapter 3.2 in the instructions for use)
Sample name:
Date of sampling:
Date of last
relubrication:
Sample location:
Bearing operating
time (hours):
Testing (Refer to chapters 3.3 to 3.6 in the instructions for use)
Sample
First visual inspection
(3.3)
Fresh unused
(name):
.......................
Used (name):
.......................
Changes:
Interpretation (Refer to chapter 3.7 & 4 in the instructions for use)
....................................................................................................................................................
....................................................................................................................................................
....................................................................................................................................................
Inspector /Technician:
The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted.
Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or
consequential arising out of use of the information contained herein.
SKF Maintenance Products
MP5366E-1 · 2009/11 · © SKF 2009
® SKF is a registered trademark of the SKF Group
www.mapro.skf.com
www.skf.com/lubrication
Routine control
Trend analysis
Other reasons: .........................................................................................................
Bearing
Bearing raceways
Seal
Housing
Consistency test
(3.4)
NLGI class:
..........................................
NLGI class:
..........................................
NLGI difference:
..........................................
Damage
Change of grease
Bearing cage
Between roller elements
Other:: ..........................................................................
Oil bleeding test
(3.5)
D
: ............mm
AvFresh
S
: ...............mm
Fresh
D
: .............mm
AvUsed
S Used : ...............mm
%
:.........................
Diff
unknown
Contamination test
(3.6)
2
2
Publicité
Table des Matières
