SKF TKGT 1 Mode D'emploi page 45

SKF Grease Test Kit TKGT 1 - Report Template
Application & lubrication conditions (Refer to chapter 3.1 in the instructions for use)
Application type:
Machine number
(bearing position):
Bearing type and
designation:
Bearing operating
temperature:
Rotational speed n
(r/min):
Load (C/P):

Special conditions:



Sealing type:



Ambient conditions:

Current lubrication conditions

Grease in use
(name):
Basic speciications:

Relubrication
interval (hours):

Relubrication

method:
Recommendation given by SKF LubeSelect
Grease
(name):
Relubrication
interval (hours):
Notes:
...........................................................................................................................................................................
...........................................................................................................................................................................
...........................................................................................................................................................................


Ambient temperature:
°C °F
n.d
m

Vertical shaft

Vibrations
Others (decribe): ...............................................................................................................................

Mechanical seals

Shields
Other (decribe): ................................................................................................................................

Dry

Contaminants
unknown
NLGI Thickener
Class: type:
unknown
Relubrication quantity
(grams):

Manual
Other (describe): ..................................................................................................................................
value:
Outer ring rotation
Standing still
Labyrinth seals
Sealed for life
Humid
Other (describe): ...................................................................................
Automatic lubricator
(http://www.skf.com/portal/skf/home/aptitudexchange)
Quantity (grams)
Date: ........ /......... /.........

With W33 design

d
m
d: Inner bore diameter, mm
D: Outer ring outside diameter, mm
C: Basic dynamic load rating, kN
P: Equivalent dynamic bearing load, kN

Oscillating movements

Shock loads

Oil seals

Dirty/dusty
Base oil
type:

unknown

Centralized lubrication system

N/A

°C °F
= 0.5*(d+D)

unknown