Boss BR-1200 CD Mode D'emploi page 345

❍Expression (Controller number 11)
Status 2nd byte
BnH 0BH
n = MIDI channel number:
vv = Expression:
* When the MIDI parameter "MIDI Fader" is set to ON, this is transmitted via the MIDI
channel set for the EXP PEDAL when the EXP PEDAL is operated.
GProgram Change
Status 2nd byte
CnH ppH
n = MIDI channel number:
pp = Program number:
* Transmitted according to the content of the SMF during playback of SMFs.
* When the MIDI parameter Effects P.C. is set to PC ONLY or PC+BANK, this is transmit-
ted via the MIDI channel selected in the Effects Channel setting when insert effects pat-
ches are switched.
* For the correspondence between Bank Select/Program numbers and the insert effect
patch banks/numbers, see p. 343.
GChannel Pressure
Status 2nd byte
DnH vvH
n = MIDI channel number:
vv = Channel Pressure:
* Transmitted according to the content of the SMF during playback of SMFs.
GPitch Bend Change
Status 2nd byte
EnH llH
n = MIDI channel number:
mm, ll = Pitch Bend value:
* Transmitted according to the content of the SMF during playback of SMFs.
IChannel Mode Messages
* Transmitted according to the content of the SMF during playback of SMFs.
GAll Sound Off (Controller number 120)
Status 2nd byte
BnH 78H
n = MIDI channel number:
GReset All Controllers (Controller number 121)
Status 2nd byte
BnH 79H
n = MIDI channel number:
GAll Notes Off (Controller number 123)
Status 2nd byte
BnH 7BH
n = MIDI channel number:
GOmni Off (Controller number 124)
Status 2nd byte
BnH 7CH
n = MIDI channel number:
GOmni On (Controller number 125)
Status 2nd byte
BnH 7DH
n = MIDI channel number:
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
0H - FH (ch.1 - ch.16)
00H - 7FH (prog.1 - prog.128)
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
3rd byte
mmH
0H - FH (ch.1 - ch.16)
00 00H - 40 00H - 7F 7FH (- 8192 - 0 - +8191)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16)
GMono (Controller number 126)
Status 2nd byte
BnH 7EH
n = MIDI channel number:
mm = mono number:
GPoly (Controller number 127)
Status 2nd byte
BnH 7FH
n = MIDI channel number:
ISystem Common Messages
GQuarter Frame Messages
Status Second
F1H mmH (= 0nnndddd)
nnn = Message type:
dddd = 4 bit nibble data:
* If the Sync parameter "Sync Gen." is set to "MTC," quarter frame messages of the time
code type specified by "MTC Type" will be transmitted when the BR-1200CD is running
(recording or playing). The transmitted time counts are summed to "SMPTE (MTC) Off-
set Time" as the song top is "00:00:00:00".
Bit Field is assigned as follows.
Frame Count xxxyyyyy
xxx Reserved (000)
yyyyy Frame No. (0-29)
Seconds Count xxyyyyyy
xx Reserved (00)
yyyyyy Seconds (0-59)
Minutes Count xxyyyyyy
xx Reserved (00)
yyyyyy Minutes (0-59)
Hours Count xyyzzzzz
x Reserved (0)
yy Time Code Type
* The time code types defined by the MIDI specification correspond to the BR-1200CD
Sync parameter "MTC Type" as follows.
MIDI specification setting
0 = 24 Frames / Sec
1 = 25 Frames / Sec
2 = 30 Frames / Sec (Drop Frame)
3 = 30 Frames / Sec (Non Drop Frame
zzzzz
GSong Position Pointer
Status 2nd byte
F2H mmH
mm, nn=Song position point:
* The current position is transmitted by the Song Position Pointer Message when the BR-
1200CD is stopped, or the locate operation has been performed, if the SYNC parameter
"Sync Gen." is set to "MIDI CLOCK."
Equipement MIDI
3rd byte
mmH
0H - FH (ch.1 - ch.16)
00H - 10H (0 - 16)
3rd byte
00H
0H - FH (ch.1 - 16)
0 = Frame count LS nibble
1 = Frame count MS nibble
2 = Seconds count LS nibble
3 = Seconds count MS nibble
4 = Minutes count LS nibble
5 = Minutes count MS nibble
6 = Hours count LS nibble
7 = Hours count MS nibble
0H - FH (0 - 15)
"MTC Type" setting
24
25
29D
29N or 30
Hours
3rd byte
nnH
00H 00H - 7FH 7FH
345