Use Of The Product; Home Page - Bodet Harmonys Trio Notice D'utilisation Et D'installation

IV - Use of the product
There are two ways to access the web interface:
1/ Open your web browser and enter the IP address of the product in the address bar.
2/ Using the Sigma software in the Configuration > IP devices > Harmonys Trio tab click the
Web Browser button to open the web server (refer to the software manual, 607726 starting at
version H) (Software version V1.16xx or above).
The SIGMA software lets you:
- detect all the products present on the network,
- set the parameter of each product or copy the parameter of one product toward a group of
products,
- update the product software,

4.1 Home page

The home page presented by the product embedded web server provides a general information
on the product.
The information is displayed as follows:
- Product: product type.
- Name: user-defined product name + MAC adress. By default: «Bodet-MAC address» matches
the one on the label delivered with the product. The name can be changed in the menu Network
Configuration. The default value allows to find the product on the network while putting it into
service.
- Synchro: display of the status of the synchronisation
- Local Date: display of the local date
- Local Time: display of the local time
8