Setup Menu - Ecler DAM614 Notice D'utilisation

9. SETUP MENU

The DAM614 features a general setup menu (hereinafter SETUP menu), or parameters that
globally affect the unit, such as the functions assigned to the REMOTE ports, the MUTE port
management, the LCD display management, etc.
To open the SETUP menu you have to simultaneously press and hold down the left and right
MENU keys. Pressing these two keys simultaneously first opens the Password protection screen to lock
the front panel (see paragraph 10):
When this screen appears, and if you want to access the SETUP menu (instead of accessing the
password protection management, as described in paragraph 10), then you must press the right MENU
key.
The new edited values are activated in real time. You can cancel an edit operation, returning the
value before editing, by pressing SHIFT + CANCEL.
To exit the Edit menu and return to the main screen:

Press SHIFT + EXIT

Stay 2 minutes without operating any control on the front panel
The next page shows the full structure and options of the SETUP menu.
NOTES:
1. Each of the REMOTE ports 1 to 4 can be connected to a WPmVOL-SR wall panel or similar,
which has two rotary controls: a 5-way selector (0, 1, 2, 3 and 4) and a volume control. Each
REMOTE port can be programmed to operate in one of the following modes:

ALL DISABLED: REMOTE port disabled, no function

IN VOLUME:
The volume control acts on the overall volume of the inputs. It is necessary to use the
o
REMOTE INPUTS menu to determine the inputs that will be affected
The selector is disabled
o

ZONE VOLUME:
The volume control acts on the overall volume of the outputs. It is necessary to use the
o
REMOTE OUTPUTS menu to determine the outputs that will be affected
The selector is disabled
o

IN SELECTOR:
The selector acts as an input selector: it allows you to choose between OFF and up to a
o
maximum of 4 of the 6 available inputs, for the outputs to which it is assigned. It is
necessary to determine the inputs that will be part of the selection options (REMOTE
INPUTS menu) and the outputs that will be affected by the selection (REMOTE OUTPUTS
menu)
The volume control is disabled
o
26
L O C K M O D E
U N L O C K A L L