Ecler DAM614 Notice D'utilisation page 10

LCD display
Display showing digital and text data for inputs, outputs and setup menus, device settings and
information.
Setup keys
The four front panel setup keys allow you to navigate through the various menus and their pages,
and access special features thanks to certain combinations of keys pressed simultaneously:
The left and right MENU keys (5, 7) allow to scroll through the different pages of the unit's setup
menus.
The PARAMETER key allows, within a menu and a page, to select the parameter whose value
has to be modified with an encoder: the name of the targeted parameter flashes in the display while its
value can be edited.
The special combinations of the setup keys are:

Left and right MENU simultaneously for 2 seconds: access to the unit's setup menu (see
chapter 9) as well as the front panel locking/unlocking and password management (see
chapter 10)

SHIFT + left MENU (EXIT): return to the main screen, from any menu

SHIFT + right MENU (CANCEL): undo the last parameter editing and recall the value as
before the change

SHIFT + PARAMETER, short press (tap):
o RECALL: load one of the presets (device setups) stored in the memory This function
is not available when browsing some general setup menus of the unit
o ENTER: confirm an important modification (e.g.: password change) in some menus

SHIFT + PARAMETER, long press:
o SAVE: save a preset containing the current device setup

Right CANCEL, kept pressed while powering up the unit: load preset #1, designed to be
edited and saved to be used as booting setup. This operation is allowed even when the unit's
front panel is locked with a password

ZA hold down and maintained while powering up the unit: displays the "Power OFF to recover
factory defaults" message. After turning off and on again, default parameters (factory
defaults) are restored, erasing all the user data, settings and presets in the unit's memory
10
MENU
5 7
PARAMETER
8
6