Save Preset Menu - Ecler DAM614 Notice D'utilisation

User presets are displayed on the screen with the Pxx prefix, where xx is the preset number
(between 01 and 20), followed by its name or LABEL. The default name of all the user presets is USER
PRESET, but it can be modified when you save one of them in memory.
The procedure for recalling a preset or a user template is the following one:

From the main menu, briefly press SHIFT + RECALL

The RECALL PRESET message is displayed and a preset number is flashing
[ T 0 2 ] 2 S T + 4 M

Select the preset or template using an encoder (ZONE A. B, C or D), and then select one
of the two following options:

Press SHIFT + RECALL to validate the selection and activate the new preset,
returning to the main screen, this time with data from the new active preset
Or

Press SHIFT + CANCEL to cancel the selection and display again the preset from the
selection list
Pressing SHIFT + EXIT at any point during the above process cancels the selection and returns
the main screen.

6.4. SAVE PRESET MENU

Once you have edited the active preset or template, the procedure to save the current
configuration in a user preset memory is the following one:

From the main menu, press SHIFT + SAVE for at least 2 seconds (long press)

The SAVE PRESET message is displayed and a preset number is flashing
[ P 0 7 ] S T E R E O

Select the user preset using the rotary control, and then select one of the two following
options:
o Pulsar SHIFT + SAVE para validar la selección
Or
o SHIFT + CANCEL para cancelar la selección y mostrar de nuevo el preset de
partida
R E C A L L
S A V E P R E S E T
P R E S E T
X 1 S T + 2 M
L I V E 3 W
17