Ecler DAM614 Notice D'utilisation page 21

Adjustable parameters for the NOISE GATE function are:
o Activation (ON/OFF)
o Activation Threshold (NG THRESHOLD). Defines the input signal level below
which the signal is attenuated with an amount indicated by DEPTH (closed gate)
o Attack Time (ATTACK). Determines the amount of time between the passing of the
threshold and the cancellation of the attenuation applied to the input signal (open
gate)
o Hold Time (HOLD): amount of time the gate stays open (without attenuation) once
the signal falls back below the detection threshold.
o Release Time (RELEASE). Determines the time it takes to close the gate again
after the hold time
2. The COPY FROM – PASTE TO operation copies all the settings from the source input to
the destination input, except for its name (LABEL)
21