Setting For Last Bus Node - Lenze INTERBUS PT Instructions De Montage

7 Commissioning

Setting for last bus node

Setting for last bus node
DIP switch 1
ON
1 2 3 4
)
Note!
DIP switch 1 must only be set to OFF for the last physical node.
ƒ
Lenze setting: all switches OFF
ƒ
Position Notes
OFF Standard device with function module is the last bus node
ON Standard device with function module is not the last bus node.
60
ON
OFF
l
E82ZAFI009
EDK82ZAFIC−010 DE/EN/FR 6.0