Commissioning; Before Switching On - Lenze INTERBUS PT Instructions De Montage

7

Commissioning

Before switching on

7 Commissioning
Before switching on
(
Stop!
Before you switch on the standard device and the plugged−in function module
for the first time, check ...
the entire wiring for completeness, short circuit and earth fault.
ƒ
the setting of the DIP switch S1 (^ 60):
ƒ
– Setting for the last node = OFF
– Setting for all other nodes = ON
54
l
EDK82ZAFIC−010 DE/EN/FR 6.0