Caution; Description - Weller WDD 161V Mode D'emploi

English
Thank you for placing your trust in our company by pur-
chasing the WELLER soldering stations WDD 161V.
Production was based on stringent quality requirements
which guarantee the perfect operation of the device.

1. Caution!

Please read these Operating Instructions and the atta-
ched safety information carefully prior to initial operation.
Failure to observe the safety regulations results in a risk
to life and limb.
The manufacturer shall not be liable for damage resulting
from misuse of the machine or unauthorised alterations.
The WELLER soldering stations WDD 161V corresponds
to the EC Declaration of Conformity in accordance with
the basic safety requirements of Directives 89/336/EEC
and 73/23EEC.

2. Description

2.1 Control Unit
The soldering station WDD 161V is part of a family of
units that has been developed for industrial production
technology and for the service and laboratory sector.
Simple and convenient operation has been achieved
through the use of a microprocessor. Two different sol-
dering/unsoldering tools can be operated at the same
time thanks to two independent, digital temperature con-
trollers. The tools themselves are automatically detected
by the soldering station and assigned to the proper con-
trol parameters. The extremely powerful 24V heating ele-
ment enables superior, dynamic performance and permit
the universal use of the soldering tool.
The vacuum required for unsoldering is generated by an
internal, maintenance-free pneumatic converter and is
activated by an integrated finger switch on the unsolde-
ring iron.
Various methods of equipotentially bonding the soldering
iron bit, a zero voltage switch, and the anti-static design
of the control unit and soldering tools supplement the
high standard of the unit. The possibility of connecting an
external input unit extends the functional diversity of this
desoldering station. Additional functions including timing
and interlocking can be realised using the WCB 1 and
WCB 2 Input Units, available as optional extras. The
extended features of the WCB 2 Input Unit include an
integrated temperature measurement unit and a PC inter-
face.
The required temperature can be adjusted over the range
50ºC - 450ºC (550°C) via 2 buttons (Up/Down). Target
and actual value are digitally displayed by making the
17
appropriate selection using the channel button.
Achievement of the pre-set temperature is indicated by
an LED assigned to the channel; this LED thus serves as
an optical regulator monitor. Continuous illumination
means that the system is warming up.
2.2 Soldering irons
DSXV 80: Unsoldering iron 80W. Conical attachment
system for the suction nozzle. In-line ver
sion (vertical work position). Tin collection
container integrated into the handle can be
changed easily without the need for tools.
Wide range of CSF (SMD desoldering
plungers) and suction nozzles. The vacu
um is activated by means of a finger
switch.
DSX 80: Unsoldering iron 80W. Conical attachment
system for the suction nozzle. A wide
range of suction nozzles enables the best
possible suctioning of filler wire at diffe
rent soldering locations. The wire collector
can be replaced easily and requires no
tools. An integrated finger switch activates
the vacuum.
WSP 150: Powerful 150W soldering iron for solde
ring work requiring extremely high tempe
ratures. Only one channel is active when
using this soldering iron. Extended tempe
rature range of up to 550 °C.
WTA 50: The unsoldering tweezers WTA 50 were
specially designed for unsoldering SMD
components. Two heating elements (2 x
25 watts), each with its own temperature
sensor, ensure constant temperatures at
both ends.
LR 82: High-performance 80 watt soldering iron
for soldering work with high heat require
ments. The soldering tip is attached by a
bayonet catch to ensure correct position
when using different tips.
WSP 80: The soldering iron WSP 80 is characteri
zed by its capacity for reaching the solde
ring temperature quickly and precisely. Its
slim design and heating power of 80 watts
makes universal usage possible - from
extremely fine to high-temperature solde
ring work. Work can be continued immedi
ately after switching soldering tips, since
the temperature is reached again quickly.
WMP: Due to its handy design, the Weller WMP
micro soldering iron is suitable for work
on professional SMD electronics. A short
distance between the handle and the sol-
dering tip ensures ergonomic handling of
the 65W soldering iron when performing
the finest of soldering tasks.