Briteq BT-700S Mode D'emploi page 8

ENGLISH
DMX-CONFIGURATION OF BT700S:
16 channel mode
BRITEQ 11/72
®
OPERATION MANUAL
BT700S
ENGLISH
22 channel mode
In 22channel mode the 6 additional channels below are added to the standard 16 channels of the BT-700S.
HOW TO OPERATE THE UNIT
Every time you turn the unit on, it will show "Reseting" on the display and move all the motors to their 'home'
position and you may hear some noises for about 20 seconds. After that the unit will be ready to receive
DMX signal or run the built-in programs.
YOU CAN OPERATE THE UNIT IN 3 WAYS:
By master/slave built-in preprogram function
o
By CA-8 easy controller
o
o By universal DMX controller ( 16 & 22 channel DMX mode )
 BY MASTER/SLAVE BUILT-IN PREPROGRAM FUNCTION:
Select this function when you want an instant show. By linking the units in master/slave connection, the
first unit will control the other units to give an automatic, sound activated, synchronized light show. Its DMX
input will have nothing plugged into it, and its master-LED will be constantly on and sound-LED will flash to
the music.
 MASTER has 4 built-in shows: You can select Show Mode 1, Show Mode 2, Show Mode 3 or
Show Mode 4 directly in the menu of the master.
 SLAVES have 2 working options: The other units are set to slave mode (slave-LED is constantly on).
In order to create a great light show you can introduce contrast movements (pan/tilt of slave is
inversed)  In the menu of the slave units you can go to option
 slave works in sync with the master.
Slave Mode 1
o
Slave Mode 2  slave works opposite from the master.
o
BRITEQ 12/72
®
OPERATION MANUAL
Slave Mode
and select:
BT700S