Briteq BT-700S Mode D'emploi page 6

ENGLISH
Pan Inversion
Normal: Panning movement is not inversed.
Pan inversion: Panning movement is inversed
 Press the ESC button and turn the jog wheel until Pan Inverse is shown on the display.
 Press the ENTER button so the display starts blinking.
 Use the Jog Wheel to select the Normal or Inverse mode.
 Once the mode is selected, press the ENTER button to confirm your choice.
( or automatically return to the main functions without any change after 30 seconds. )
To go back to the functions without any change press the ESC button.
Tilt Inversion
Normal: Tilt movement is not inversed.
Tilt inversion: tilt movement is inversed
 Press the ESC button and turn the jog wheel until Tilt Inverse is shown on the display.
 Press the ENTER button so the display starts blinking.
 Use the Jog Wheel to select the Normal or Inverse mode.
 Once the mode is selected, press the ENTER button to confirm your choice.
( or automatically return to the main functions without any change after 30 seconds. )
To go back to the functions without any change press the ESC button.
Auto Test
Used to activate the internal "self-test" program which shows all possibilities of the unit.
 Press the ESC button and turn the jog wheel until Auto Test is shown on the display.
 Press the ENTER button to start the internal self-test program.
Manual Test
Used to activate the internal functions of the unit manually.
 Press the ESC button and turn the jog wheel until Manual Test is shown on the display.
 Press the ENTER button
 Use the jog wheel to select one of the functions of the unit (pan, tilt, shutter, etc...)
 Press the ENTER button so the display starts blinking
 Use the Jog Wheel to select a value (0~255) for this function
 Once the mode is selected, press the ENTER button to confirm your choice.
( or automatically return to the main functions without any change after 30 seconds. )
To go back to the functions without any change press the ESC button.
Lamp temperature
Used to show the temperature inside the lamp compartment
 Press the ESC button and turn the jog wheel until Lamp Temperature is shown on the display.
 You can now read the ambient temperature of the lamp .
Lamp Hours
Used to show the working hours of the unit
 Press the ESC button and turn the jog wheel until Lamp Hours is shown on the display.
 The number of working hours of the unit is shown on the display.
Lamp On/Off
Used to switch the lamp ON/OFF so you can cool the lamp with the internal fans before
transportation.
 Press the ESC button and turn the jog wheel until Lamp On/Off is shown on the display.
 Press the ENTER button so the display starts blinking.
 Use the Jog Wheel to select the Yes (lamp on) or No (lamp off) mode.
 Once the mode is selected, press the ENTER button to confirm your choice.
( or automatically return to the main functions without any change after 30 seconds. )
To go back to the functions without any change press the ESC button.
Lamp On/Power On
"ON" is selected: When you switch the mains power on, the lamp will also go on
"OFF" is selected: When you switch the mains power on, the lamp will not go on
 Press the ESC button and turn the jog wheel until Lamp On/Power On is shown on the display.
BRITEQ
®
OPERATION MANUAL
7/72
ENGLISH
 Press the ENTER button so the display starts blinking.
 Use the Jog Wheel to select the On (lamp on/Power on) or Off (lamp off/Power off) mode.
 Once the mode is selected, press the ENTER button to confirm your choice.
( or automatically return to the main functions without any change after 30 seconds. )
To go back to the functions without any change press the ESC button.
Software Version
Used to check the software version of the unit.
 Press the ESC button and turn the jog wheel until Software Version is shown on the display.
 The software version of the unit is shown on the display.
Reset
Used to force a reset of the unit.
 Press the ESC button and turn the jog wheel until Reset is shown on the display.
 Press the ENTER button so the display starts blinking.
 Use the Jog Wheel to select the Yes (Reset) or No.
 Once the mode is selected, press the ENTER button to confirm your choice.
( or automatically return to the main functions without any change after 30 seconds. )
To go back to the functions without any change press the ESC button.
Home Position Adjust

Press ENTER for at least 12 seconds to go into offset mode

Now you can adjust the home position ( this is the zero position )

When you want to adjust gobo and color home position, you should run Adjust Focus mode first

The functions are shown below:
Adjust Focus
 Press ENTER for at least 12 seconds to go into offset
mode and turn the jog wheel until Adjust Focus is shown
on the display
 Press the ENTER button so the display starts blinking.

By pressing the ENTER button several times, the unit
will focus on different positions.

ENTER > "tilt 135°" position, ENTER > "tilt 45°" position,
ENTER > "pan 90°" position, ENTER > "pan 180°"
position, ENTER > "pan 270°" position
 Use the jog wheel to adjust the focus
Pan offset
 Press ENTER for at least 12 seconds to go into offset
mode and turn the jog wheel until Pan Offset is shown on
the display
 Press the ENTER button so the display starts blinking.
 Use the jog wheel to adjust the Pan home position.
Tilt offset
 Press ENTER for at least 12 seconds to go into offset
mode and turn the jog wheel until Tilt Offset is shown on
the display
 Press the ENTER button so the display starts blinking.
 Use the jog wheel to adjust the Tilt home position.
Dimmer offset
 Press ENTER for at least 12 seconds to go into offset
mode and turn the jog wheel until Dimmer Offset is shown
on the display
 Press the ENTER button so the display starts blinking.
 Use the jog wheel to adjust the dimmer home position.
BT700S BRITEQ
®
OPERATION MANUAL
8/72 BT700S