Briteq BT-700S Mode D'emploi page 3

ENGLISH
®
Thank you for buying this BriteQ product. To take full advantage of all possibilities and for your own safety,
please read these operating instructions very carefully before you start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
●
Powerful moving head, based on HTI-700 discharge lamp!
●
Extremely high optical output and precision for razor sharp gobos
●
Extremely silent ventilation system, perfect for TV-studio and stages
●
Modular design for easy servicing
●
2x 16 character LCD display for menu driven setup.
●
16 or 22 DMX control channels:
●
16 DMX channels (pan, tilt, pan/tilt speed, dimmer, shutter/shaking, color1, color2, gobo1, gobo1
rotation, gobo2, prism/prism macros, prism rotation, focus, iris, special functions)
●
22 DMX channels (pan, tilt, pan/tilt speed, dimmer, shutter/shaking, color1, color2, gobo1, gobo1
rotation, gobo2, prism/prism macros, prism rotation, focus, iris, special functions, pan 16bit, tilt 16bit,
movement macros, movement size, iris macros, dimmer macros)
●
Pan 540° in 2,8sec and tilt 270° in 1,6sec (both in 8 or 16 bit)
●
Automatic pan/tilt sensor correction with home position adjustment
●
Pan/tilt lock function during transport
●
2 gobo wheels with sensor index system and gobo mixing:
●
Gobo wheel1: 5 exchangeable, rotating, indexed gobos plus white
●
Gobo wheel2: 5 exchangeable fixed gobos
●
2 color wheels with sensor index system and color mixing:
●
Color wheel1: 6 colors + white, with bi-directional rainbow effect
●
Color wheel2: 6 colors + white, with bi-directional rainbow effect
●
Prism with bi-directional rotation
●
0-100% mechanical linear dimmer with macro functions
●
0-100% motorized linear iris with macro functions
●
High speed strobe: 1 ~ 12 flash/second
●
...
BEFORE USE
 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the carton contains the following items:
 BT700S unit
 Operating instructions
 2 Omega clamps
SAFETY INSTRUCTIONS:
CAUTION
BRITEQ
®
OPERATION MANUAL
CAUTION: To reduce the risk of electric shock, do not
remove the top cover. No user-serviceable parts inside.
Refer servicing to qualified service personnel only.
1/72
ENGLISH
 To protect the environment, please try to recycle the packing material as much as possible.
 A new light effect sometimes causes some unwanted smoke and/or smell. This is normal and disappears after
some minutes.
 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
 This unit is for indoor use only.
 Don't place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign
object enters the unit, immediately disconnect the mains power.
 Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture must
be fixed at least 50cm from surrounding walls.
 Don't cover any ventilation openings as this may result in overheating.
 Prevent use in dusty environments and clean the unit regularly.
 Keep the unit away from children.
 Inexperienced persons should not operate this device.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.
 The units' surface temperature may reach up to 85°C. Don't touch the housing with bare hands during its
operation.
 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and
servicing.
 Allow the device about 10 minutes to cool down before replacing the bulb or start servicing.
 Always unplug the unit when it is not used for a longer time or before replacing the bulb or start servicing.
 The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
 Check that the available voltage is not higher than the one stated on the rear panel of the unit.
 The power cord should always be in perfect condition: switch the unit immediately off when the power cord is
squashed or damaged.
 Never let the power-cord come into contact with other cables!
 This fixture must be earthed to in order comply with safety regulations.
 Don't connect the unit to any dimmer pack.
 Always use an appropriate and certified safety cable when installing the unit.
 In order to prevent electric shock, do not open the cover. Apart from the lamp and gobos there are no user
serviceable parts inside.
 Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same type
and electrical specifications!
 In the event of serious operating problems, stop using the fixture and contact your dealer immediately.
 The housing and the lenses must be replaced if they are visibly damaged.
 Please use the original packing when the device is to be transported.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important: Never look directly into the light source! Don't use the effect in the presence of persons suffering from
epilepsy.
BT700S BRITEQ
®
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the
use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence
of important operation and maintenance (servicing) instructions in the literature accompanying
this appliance.
This symbol means: indoor use only
This symbol means: Read instructions
This symbol determines: the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than 2 meters
The device is suitable for mounting on standard flammable surfaces. Standard flammable
surfaces include building materials such as wood and wood-based materials more than 2mm
thick.
2/72
OPERATION MANUAL
BT700S