Carrera RC Lap Counters 800025 Instructions De Montage Et D'utilisation page 10

Description of the Carrera RC Lap Counter
Basic design
Maximum 4 vehicles per row. Up to 63 vehicles per race.
1
2
3
max. 5 m
ca. 1,5 m · approx 1.5 m/59 in.
Place the traffic light module and the second
module on a flat and level surface and con-
nect them to each other with the fibre-optic
cable supplied.
To be able to take part in the race, the partici-
pants must keep their contollers within a
radius of 5 metres of the Lap Counter traffic
light module both before and during the race
itself.
How to use the Carrera RC
Lap Counter
1
Press for 3 seconds
2
Press once
3
Press once
4
10
Switch on one controller of the Carrera
Racing Machine and define the number of
laps. Please make sure that no higher
number of laps is entered on any other
Controller since the Lap Counter will
always accept the highest value entered
for all participants.
1. Stop-watch
When the controller is switched on, the
stop-watch appears. Press for 3 seconds
to get into the sub-menu.
2. LAP
By turning the little wheel, here you can
alter the number of laps to be run in a
race. Press once to move to the next
menu.
3. Time runs
Press once to move to the next menu.
4. SP=TH Trimm
To store, press for three seconds on the
small wheel.
(See also instructions for the Racing
Machine from May 2011, or on
carrera-rc.com)