Adjusting The Display Settings; Adjusting The Display Brightness; Setting The Display Illumination Colour - Blaupunkt Kingston MP47 Mode D'emploi Et De Montage

Adjusting the display
settings

Adjusting the display brightness

If your car sound system is installed as de-
scribed in the installation instructions and
your vehicle features the corresponding
connection, the display brightness for day
and night is switched by switching on the
vehicle lighting. You can adjust the display
brightness separately for night and day in
steps ranging from 1 - 16.
u Press the MENU/OK button ;.
u button < repeatedly
Press the or
until "DIM DAY" or "DIM NIGHT" appears
on the display.
Press the MENU/OK button ; to open
u
the menu.
u
Press the or
between the brightness levels.
When you have fi nished making your chang-
es,
press the ESC/DIS button 5.
u
Setting the display illumination
colour
For the display illumination, you can either
mix a colour from the RGB spectrum (red
green blue) or mix with the colours red and
green. You can also start a colour seek and
select the colour of your choice.
All manuals and user guides at all-guides.com
button < to select
Mixing a colour for the display
illumination
To customise the display illumination to suit
your tastes you can either mix a colour your-
self using the three primary colours red,
green and blue (RGB) or from the colours
red and green (RG).
Press the MENU/OK button ;.
u
u
Press the or
edly until "DISP COL" appears on the
display.
button 9 to open the
u
Press the
RGB menu or the
the RG menu.
The display shows "4096 COL" for the RGB
menu or "256 COL" for the RG menu.
u button 9 to open the
Press the
menu for mixing your own colour.
Either "R", "G", and "B" or "R" and "G" are
displayed with the current values. The set-
ting for "R" is activated. You can adjust a
value from 0 to 16 each for every available
colour component.
u
Press the or
the value of a colour component.
u
Press the or
between the colour components.
When you have fi nished making your chang-
es,
u press the MENU/OK button ;.
u Press the ESC/DIS button 5 to exit
the menu.
Display
button < repeat-
button 9 to open
button < to adjust
button 9 to switch
33