marcel aubert Rotatif 50 Mode D'emploi page 16

Rotatif 150
Rotatif 200
Introduction
A "Rotatif" system is used to measure a cylindrical object on all its faces.
Its vertical optics 3) measures its diameters and lengths.
Its horizontal optics 27) allows to rotate around the vertical optical axis. It can thus measure the
object "at the end" linearly and angularly.
Its tool holder 12) "Concentricity Pro" is used to orient the object at an angle suitable for the
desired measurement.
Its column Z 11) is used to adjust the sharpness.
Its XY 14) cross table is used to move, and therefore measure, the object in relation to the verti-
cal optics.
rotatif$24.docx 16