Installation For Vertical Sliding Sash Windows - Impecca IPAC16-BRB Manuel De L'utilisateur

INSTALLATION FOR VERTICAL SLIDING SASH WINDOWS

For windows that have vertical sliding sashes, please
follow these installation instructions.
Note: The window panel cannot be installed in
windows less than 22" (559mm) high, as you will be
unable to shut the exhaust cover.
STEP 1: Attach the protective grille to the window panel.
Push the grille firmly to ensure that its four projections fit
into th e holes in the window panel.
STEP 2: Cut the foam seal to the proper length and attach it
to the window sill.
STEP 3: Attach the window panel to the windowsill.
A) If the inner width of the window is between 22"(559mm) and 24"(609mm)
wide:
1. Remove the adjustment panel from
the window panel and cut the window
panel to the same width as the win-
dow frame opening.
Window
panel
–13– –13–
Protective grille
Foam seal
Exhaust cover
Cut
Adjustment panel