Impecca IPAC16-BRB Manuel De L'utilisateur page 5


Stop operation and remove window filler
panels from window during severe storm
or hurricane.
• Operation during a severe storm may allow
a significant amount of water to enter the
indoors.

Do not place obstacles around air-intake
vents or inside cool air outlet.
• It may cause failure of appliance.

Do not use strong detergent such as
wax or paint thinner to clean the unit.
Use a damp, soft cloth.
• Appearance may deteriorate due to change
of product color or scratching of its surface.
CAUTION ELECTRICAL INFORMATION
• Be sure your electrical wiring is adequate for the model you have chosen. This information can be found on
the rating label, a silver-colored sticker generally located on the upper-right side of the cabinet.
• Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is
important. The power cord is equipped with a three-prong
grounding plug for protection against shock hazards.
• Your air conditioner must be connected to a properly
grounded wall receptacle. If the wall receptacle you intend to
use is not adequately grounded or protected by a time delay
fuse or circuit breaker, have a qualified electrician install the proper
receptacle.
• Ensure the receptacle is accessible after the unit installation.
The power supply cord contains a current device that senses damage
to the power cord and excess current draw from the unit. To test your
current device do the following:
1. Plug in the Air Conditioner.
2. Press the TEST button. You will hear a click as the RESET button
pops out within the rubber housing and the LED will turn off.
3. Press the RESET button. You will hear a click as the button
engages and the LED will illuminate.
4. The power supply cord is now supplying electricity to the unit.
Note: Your model may have the TEST and RESET buttons on the
side or the front of the plug head.
NOTES:
• Do not use the TEST and RESET buttons to turn the unit on or off.
• If the current device fails the test or the power cord becomes dam-
aged, the entire power cord must be replaced with an equivalent
power cord and current device by a licensed electrician.
CAUTION

Hold the plug by the head of the power
plug when unplugging unit.
• Pulling from the wire can cause wire to fray
leading to electric shock or fire.

Do not place heavy objects on the
power cord and ensure that the cord
is not pinched or stressed.
• There is danger of fire or electric shock.
–5– –5–

Unplug the power cord when not using
the unit for extended periods of time.
• Will prevent damage to the unit.

Always insert the filters securely.
Clean filter at least once per month.
• Operation with dirty filters (or without
filters) will effect performance and may
cause damage to the unit.
NOTE:
The power supply cord with this air conditioner
contains a current detection device designed to reduce the risk
of fire. In the event that the power supply cord is damaged, it
cannot be repaired -- it must be replaced with a cord from the
Product Manufacturer.
Side button
version