Impecca IPAC16-BRB Manuel De L'utilisateur page 16

STEP 2: Install the hose at the rear clip of the win-
dow exhaust adapter (assembled in the previous
step). Aim the opening of the hose at the round
mouth of the rear clip and rotate the hose counter-
clockwise into the rear clip of the window exhaust
adapter.
STEP 3: Install the hose to the Joint A. Aim the opening
of the hose at the round mouth of Joint A. Rotate the
hose counterclockwise into joint A.
STEP 4: Attach Joint A to the back of the portable AC unit with the two cutouts on the
joint. Line them up over the two tabs on the air exhaust outlet. slide Joint A down firmly
until it clicks.
Note: To remove the hose assembly, make sure to
press down on the two exhaust outlet tabs and then
lift the hose assembly up.
STEP 5: Install the exhaust hose sub assembly to the rear plate of the protective grille of
the window panel.
Clasp of protective grille
Rear clip
–16– –16–
Hose
Rear clip
Window exhaust
adapter
Joint A
Hose