Caring For Your Air Conditioner - Impecca IPAC-08NR Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. Place the unit back in the desired location, reconnect the exhaust hose and plug
in the electrical power cord.
5. Restart normal cooling operation of your unit.
NOTE: The internal tank capacity is approximately 1.5 liters when full.
CONTINUOUS WATER DRAINAGE
In high-humidity climates a continuous water drainage system is an optimal solution.
With an optional drainage hose (sold separately), the unit can be placed near a drain, a
large collection tank, or outdoors.
1. Open the partition plate plug.
2. Connect the hose the the partition plate joint and lead it carefully to the floor drain.
3. Ensure the hose is placed downward with no kinks or bends; the air conditioner unit
relies on gravity to properly drain and can not be elevated.

CARING FOR YOUR AIR CONDITIONER

IMPORTANT: Before performing any maintenance, ensure the air conditioner unit is
turned off and disconnect the power cord from the electrical outlet.
AIR FILTER CLEANING
A dirty air filter reduces your unit performance significantly and increases your cooling
costs! Follow the following steps to clean the air filter:
1. Grasp the hook on the bottom to remove the air filter, pulling in the direction of
the arrows.
2. Wash the filters by immersing them into soapy, lukewarm water.
3. Rinse the filter with clean water and dry it in a shaded place. Do not expose the
filters to direct sunlight as they can melt or deform!
4. Install the air filter to the original port.
BEFORE FIRST SEASONAL USE
1. Check to see if any objects are obstructing the air intake and exhaust ports.
–9–

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ipac-11nr

Table des Matières