Squeegee Installation - Clarke FOCUS II Manuel D'utilisation

ENGLISH
Types of cylindrical brushes available
19.1 in (485 mm) models
Poly Plus 0.40
Polypropylene 0.45
Medium Grit
Cylindrical brush application guide (suggestions only)
Models
General cleaning:
Concrete
Terrazzo floor
Ceramic tiles/quarrystones
Marble
Vinyl tiles
Rubber tiles

Squeegee installation

1. Install the squeegee (A, Fig. 13) and fasten it with the knobs
(B), then connect the vacuum hose (C) to the squeegee.
2. Adjust the squeegee with the knob (D) so that the rear blade
touches the floor along all its length.
Guide to match squeegees and brush/pad-holder/cylindrical brush decks
Deck model
Deck with one brush, brush diameter: 17in (430 mm)
Deck with one brush, brush diameter: 20 in (508 mm)
Deck with two brushes, brush length: 19,1 in (485 mm)
Deck with one brush rectangular, brush width: 20 in (508 mm)
16
Poly Plus
Operator's Manual - FOCUS
Polypropylene
Figure 13
Squeegee model
Aluminum (A, Fig 13), width 29.9 in (760 mm)
II L17 - S20 - L20 - L20 Cyl. - BOOST
®
Medium Grit
L20
®