Using The Fl Ash; Adjusting The Exposure; Adjusting The Zoom; Taking A Continuous Shot - LG GW620 Guide De L'utilisateur

Using the flash
The default flash setting is auto,
but there are other options.
1
Select
of the viewfinder to enter the
flash sub-menu.
2
There are three flash options:
Auto - Your camera will assess
the light available for a good
picture and use the flash as
necessary.
On - The camera will always
flash.
Off - The camera will never
flash. This is useful if you want
to save battery power.
3
When you touch the option
you want, the flash menu
will automatically close,
allowing you to take a picture
immediately.
4
The flash status icon in the
viewfinder will change, based
on the new flash mode.
from the left side

Adjusting the exposure

The exposure defines the
difference between light and dark
areas in an image. A low contrast
image will appear foggy, whereas
a high contrast image will appear
much sharper.
1
Touch
2
Slide the contrast indicator
along the bar towards
for a lower exposure and
hazier image or towards
for a higher exposure and a
sharper image.

Adjusting the zoom

You can also zoom in or zoom
out. Touch
zoom.

Taking a continuous shot

1
From the viewfinder, touch
to open all advanced
settings options and select
Shot mode and Continuous
shot.
.
and adjust the
45