Sony CBK-3610XS Mode D'emploi page 20

Attaching the extension cable
Attach the imager block adapter receiver to the extension cable repeater (1), and attach the extension
cable receiver to the camera body adapter (2) (tightening torque of 1.4 N·m).
Note
When attaching the receiver, align the index marks on the top and sides of the receiver.
Removing from Camera
1
Remove the receiver from the camera
body adapter.
2
Remove the camera body adapter from
the camera body.
3
Remove the imager block from the
imager block adapter.
Note
Orient the lens side face down when placing the
removed imager block on a flat surface. If the heat
sink side is placed face down, the flangeback
(flange focal distance) may be adversely affected.
4
Attach the imager block, removed in
step 3, to the camera body (tightening
torque of 1.4 N·m).
20
Attaching to the Camera