Festo MTR AC Série Notice D'utilisation page 20

MTR-...
Fitting mechanical components
Please note
Confined fitting situations lead to a build-up in heat.
S Make sure that the motor has sufficient space for the dissipation of heat.
1. Check whether the MTR-... matches the specifications ordered.
Depending on the order, these motors contain a spring-loaded holding brake
as well as gears. On motors without prefitted gears, it is possible to switch in
gears.
2. Clean the shaft of the gear motor.
The coupling will only grip without slipping on a shaft pin which is dry and free
of grease. If fat solvent media enters the bearing, it will wash out the service
life lubrication of the bearing.
3. Place the MTR-... on the motorflange 9.
4. Tighten the fastening screws (see axis instructions).
5. Tighten the clamping screw of the coupling (see axis instructions).
6 Operation
Warning
Hot parts of the housing can cause burning.
S Make sure that people and objects cannot come into direct contact with the
motor.
20
Festo MTR-... 0206a English