Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. Part description

Filling cap
The membrane ventilates the air inside the spray tank, thereby preventing the contraction of the tank and
ensuring permanent suction of the spray mixture.
The O-ring prevents spillage of the spray mixture.
Filling filter
Always filter the spray agent through the filling filter into the tank. This protects the pump from foreign object
damage.
Spray tube support
The spray tube can be placed in the nozzle mount underneath, and clamped above in the gap between the
retaining ring to prevent the nozzle from contamination.
Spray tank
Robust, ergonomical plastic container with a 15 (4 US gallons) litre capacity.
Adjustable carrying belt
To shorten the shoulder straps, pull on the protruding straps of the belt, and to lengthen, move the buckles
up.
Click belt
Allows you to easily put on and take off the appliance. On one side fasten the belt, put the appliance on, and
comfortably click together with the second buckle.
Potentiometer, On/Off button
One turn to the right = appliance is switched on.
The pressure can be continuously adjusted from 0.5 – 6 bar.
LED display
Whilst the appliance is running the LED display provides information about the battery's current state of
charge. Green: State of charge > 50 %, yellow: State of charge 30 – 50 %, red: State of charge < 30 %. In the
event of failure, an error code will be displayed (see page 17).
Hose
Its length of 1.5 m (4.92 ft) enables maximum freedom of movement.
Trigger
Robust plastic valve with an integrated filter and screwed in spray tube connection.
Spray tube
Curved 50 cm (1.64 ft) long nickel plated brass spray tube.
Fanjet nozzle
Rotatable stainless steel nozzle with a spray angle of 80°.
For flow rates, please refer to the table on page 17.
Air vessel
The air vessel smooths out the pressure surges during the spraying.
Pump and motor
The electronically controlled piston pump controls the motor speed in accordance to the output required
(pressure and flow). In this way the battery is saved for a large part of the time, and you can use the
appliance for longer.
Motor cover
Protects the motor from splash water, contanimation and impacts.
Battery
The appliance has a quick-change Li-ion battery.
The Li-ion battery automatically reverts to sleep mode when it is not used for a long period of time, in order to
avoid a full self-discharge. The battery will be reactivated by taking out the battery and reinserting it.
- 15 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rpd 15

Table des Matières