TERMA MEG Mode D'emploi page 24

REG 3
1 — Temperature regulation ring with temperature set-
ting indicators:
After the device is turned on, it heats the radiator up to
the set temperature. Having reached that temperature,
the device will turn on and off regularly in order to
maintain it.
Construction of the device as well as the physical
characteristics of the heating agent inside the radiator
influence the way in which the heat is distributed — the
temperature of the bottom pipes of the radiator (espe-
cially the two located at the very bottom of the radiator)
24
User manual Meg, Moa, Reg 2, Reg 3 www.termagroup.pl
may be lower than the temperature of the remaining
parts of the radiator — this is a normal phenomena.
Emergency situations
Should you discover any abnormalities in the way the
device is operating, please check if:
• The device is correctly connected to the installation.
• The radiator is correctly filled with the heating
agent.
If the heating element unit is still not working correctly,
it should be uninstalled and returned to the Seller.