TERMA MEG Mode D'emploi page 19

Always make sure that one of the
valves is open prior to using the heating
element unit!!
8. Connect the heating element unit to the
socket / installation. The device is ready for use.
Device disassembly
1. In case of a radiator connected to a central
heating system, close the valves and remove
the heating agent. For electric radiators —
take it off the wall and position it in such
Maintenance
1. Disconnect the device from electricity prior to
cleaning.
2. Heating element control head should be cleaned
with a dry or damp cloth with a very small amount of
Product disposal
This product should not be disposed of as
general waste but should be brought to the
appropriate collection point for recycling of
electric and electronic devices. This informa-
tion is provided by the sign on the product,
en
a way to prevent the heating agent from pouring
out of the radiator during disconnecting the heating
element.
2. Twist the heating element off using a spanner no 22.
detergents, which should never contain any solvents
or abrasive agents.
user manual and packaging. Information on the ap-
propriate point for used devices can be provided by Your
local distributor or manufacturer of the product. Thank
You for Your effort towards environment protection.
19