TERMA MEG Mode D'emploi page 23

REG 2
1 — Ring indicating that the device is operating
After the device is turned on, it heats the radiator up to
65° C. Having reached that temperature, the device will
turn on and off regularly in order to maintain it.
Basic version of the device is not fitted with the on / off
switch on the casing — it can be turned on / off by plug-
ging it into the socket (or connected permanently to the
electric circuit). Shining ring (1) indicates that the device
is connected to electric circuit.
Version +W of the device is additionally fitted with the
on / off switch on the plug. Construction of the device as
well as the physical characteristics of the heating agent
inside the radiator influence the way in which the heat
en
is distributed — the temperature of the bottom pipes of
the radiator (especially the two located at the very bot-
tom of the radiator) may be lower than the temperature
of the remaining parts of the radiator — this is a normal
phenomena.
Emergency situations
Should you discover any abnormalities in the way the
device is operating, please check if:
• The device is correctly connected to the installation.
• The radiator is correctly filled with the heating
agent.
If the heating element unit is still not working correctly,
it should be uninstalled and returned to the Seller.
23