BFT MOOVI 30 ALPHA BOM Instructions D'utilisation page 18

17.2) TABLE A: DIP SWITCH
DIP Default Definition
TCA- Automatic
DIP 1 ON
closing time.
DIP 2 ON FCH- Photocells.
DIP 3 OFF BLI - Block Pulses.
3P/4P - 3 steps or 4
DIP 4 OFF
steps.
DIP 5 OFF CODE FIX - Fixed code.
RADIO LEARN -
DIP 6 OFF Transmitter program-
ming.
SCA- Gate open light
DIP 7 OFF
or 2nd radio channel.
DIP 8 OFF FAST CLOSE
18
- MOOVI 30-60 - ALPHA BOM
INSTALLATION MANUAL
Cross out
setting Description
used
ON Automatic closing ON.
OFF Automatic closing OFF.
ON Photocells active during closing only.
OFF Photocells active during closing and opening.
ON START commands not accepted during opening.
OFF START commands accepted during opening.
ON Switches to 3-step logic.
OFF Switches to 4-step logic.
ON Activates built-in receiver in fixed-code mode.
OFF Activates built-in receiver in rolling-code mode.
ON Enables wireless memorizing of transmitters (REPLAY, CLONI,)
Wireless memorizing disabled: wireless learning of any remote control disabled (including
OFF
CLONI and REPLAY).
ON Activates relay output as 2nd radio channel.
OFF Activates relay output in Gate open light mode.
ON Closes barrier after the photocells are cleared before waiting for the set TCA to elapse.
OFF Command not enabled.