Creating Your Own Program (Program Play) - Sony CMT-X3CD Mode D'emploi

REPEAT
To switch the repeat play mode, press
REPEAT  repeatedly.
You can select the following play modes.
Play mode
ONE
FOLDER*
ALL
OFF
* This play mode is applicable only for playing a
USB device or MP3/WMA disc.
When "PLS STOP" appears
You cannot change the play mode during
playback. Stop playback, then change the
play mode.
Note
 Once the power cord is unplugged, the play
mode is turned off automatically.
Note on playing MP3/WMA discs

Do not save unnecessary folders or files
on a disc that has MP3/WMA files.

Folders that have no MP3/WMA files are
not recognized on the system.

The system can only play MP3/WMA files
that have a file extension of ".mp3" or
".wma."
Even when file name has the ".mp3" or
".wma" file extension, if it is not an audio
MP3/WMA file, playing this file may
generate a loud noise, which could cause
damage of the system.

The maximum number of MP3/WMA
folders and files compatible with this
system is:

256* folders (including the root folder)

999 files

999 files in a single folder

8 folder levels (in the tree structure of
files)
10
GB
Effect
Plays the selected track
repeatedly. "REP ONE"
appears on the display
window .
Plays all tracks in the
selected folder repeatedly.
"REP FLDR" appears on the
display window .
Plays all tracks in a disc
repeatedly. "REP ALL"
appears on the display
window .
Cancels repeat playback.
* This includes folders that have no MP3/WMA
or other files. The number of folders that the
system can recognize may be less than actual
number of folders, depending on the folder
structure.

Compatibility with all MP3/WMA
encoding/writing software, CD-R/RW
drive and recording media cannot be
guaranteed. Incompatible MP3/WMA
discs may produce noise or interrupted
audio or may not play at all.
Creating your own
program (Program Play)
Plays the programmed track or file.
1 Press   to stop playback.
2
Press PLAY MODE  repeatedly
to select "PROGRAM."
3
When using an MP3 disc, press
+/–  to select the folder
containing the tracks or files that
you want to program.
4 Press /  to select a
desired track or file, then press
.
Selected track
or file number
Repeat the steps above to program
additional tracks or files.
5 Press  .
Your program of tracks or files starts
playback.
Total playing time of
the selected track or
file