EdilKamin SIDE 50x50 PLUS N Installation, Usage Et Maintenance page 29

Primary air for combustion and glass cleaning: Primary air for combustion and glass cleaning:
Adjustment is carried out using the lever as follows: Adjustment is carried out using the lever as follows:
• • "lighting"/max heating capacity position (Fig. 1): "lighting"/max heating capacity position (Fig. 1):
Lever placed all the way to the right. Lever placed all the way to the right.
To light the cold replace and for maximum combustion-cham- To light the cold replace and for maximum combustion-cham-
ber power ber power
• • "slow burning" position (Fig. 2): "slow burning" position (Fig. 2):
Lever placed all the way to the left. Lever placed all the way to the left.
All primary combustion air vents are closed. All primary combustion air vents are closed.
• "glass cleaning" position (Fig. 3): • "glass cleaning" position (Fig. 3):
Lever placed in the centre. Lever placed in the centre.
Self-closing door (Fig. 4) Self-closing door (Fig. 4)
the replace is delivered with the door balanced. the replace is delivered with the door balanced.
To make the door self-closing, one or more plates (P) must be To make the door self-closing, one or more plates (P) must be
removed from the counterweights. removed from the counterweights.
Cleaning the glass ( g. 5) Cleaning the glass ( g. 5)
- open the front door, using the tool provided (the "cold hand" - open the front door, using the tool provided (the "cold hand"
1) on the latch plate located on the upright at the side of the 1) on the latch plate located on the upright at the side of the
door (turn it 90°). door (turn it 90°).
- after cleaning, close the door again, always by means of the - after cleaning, close the door again, always by means of the
latch plate latch plate
INSTRUCTIONS FOR USE
- 29
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
-
L
L
L
P
1