Cordless Remote Mode (Remote); Meter-Feet Changeover (M/Ft) - Metz MECABLITZ 58 AF-2 digital Mode D'emploi

7.6 Cordless remote mode (Remote)

• When „Remote OFF" appears, the cordless remote mode is deactivated.
• When „Remote Slave" appears, the flash unit is operating completely as a sla-
ve flash unit. See also Section 18.
Setting procedure:
BEEP
Select
• Press the
Remote
appears on the display.
FB
Set
• Select the „Remote" menu option by pressing the
and
highlighted.
Remote
• Confirm the selection of the special function by pres-
Slave
sing the
• Select the desired setting with the
Set
keys. The setting takes effect immediately.
SLAVE
• Press the button
GROUP:A EZoom 50
reset to its normal view. If the button
CHANNEL:1
sed, the display is automatically reset to its normal
Para Sel
view after about 5 seconds.
112
button repeatedly until „Select"
Sel
keys. The selected menu option will be
button.
Set
and
repeatedly until the screen is
is not pres-

7.7 Meter-Feet changeover (m/ft)

The maximum flash range indicated by the flash unit's display can either be
shown in meters or feet. The setting can be adjusted under the menu option
m/ft.
Setting procedure:
• Press the button repeatedly until „Select"
Sel
appears on the display.
• Select the „m/ft" menu option by pressing
the and keys.
The selected menu option will be highlighted.
• Confirm the selection of the special function by pres-
sing the button.
Set
• Select the desired setting with the
keys. The setting takes effect immediately.
– When „m" is displayed, distances will be shown
in meters.
– When „ft" is displayed, distances will be shown in
feet.
• Press the button repeatedly until the display is
reset to its normal state. If the button
is not pressed, the display is automati-
cally reset to its normal view after about
5 seconds.
Zoom Ext
Select
m/ft
AF-BEAM
Set
m
and
Set
A F 4.5
m
AZoom 70
14 m ISO 200