Wide-Angle Diffuser; Flash Techniques; Bounce Flash; Bounce Flash With A Reflector Card - Metz MECABLITZ 58 AF-2 digital Mode D'emploi

Masquer les pouces Voir aussi pour MECABLITZ 58 AF-2 digital:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34

9 Wide-angle diffuser

With the wide angle diffuser
, focal lengths of 12 mm or more can be illumi-
nated (35 mm format).
Pull the wide-angle diffuser
reflector
wide-angle diffuser automatically folds downwards.
The main reflector automatically moves to the required
position. The distance readings and the zoom value
are corrected to 12 mm on the display panel.
To insert the wide-angle diffuser
in.
Mecabounce 58-90
If the Mecabounce 58-90 (optional accessories, see 22) is fitted to the main
reflector
of the flash unit, the main reflector is automatically guided to the
position required. The distance data and zoom factor are corrected to 16 mm.
The simultaneous use of the wide-angle diffuser and the Mecabounce is
not possible.
116
out from the main
as far as it will go, and then release it. The
, turn it upwards 90° and push it all the way

10 Flash techniques

10.1 Bounce flash

Bounce flash illuminates the subject more softly and reduces dense shadows. It
also reduces the drop in light from foreground to background that occurs for
physical reasons.
The main reflector
of the flash unit can be swivelled horizontally and tilted
vertically for bounce flash. To avoid colour cast in your shots, the reflective sur-
face should be colour-neutral or white. For frontal fill-in lighting, the secondary
reflector
can also be activated in the Select Menu (see 7.8).
When tilting the main reflector vertically, make sure that it is turned
through an angle that is wide enough to prevent direct light from falling
on the subject. The reflector should be tilted at least as far as the 60°
lock-in position.
Flash ranges do not appear on the display when the main reflector is turned.

10.2 Bounce flash with a reflector card

The use of bounce flash with the integrated reflector card
lights in the eyes of human subjects.
• Tilt the reflector head upwards by 90°.
• Pull the reflector card
together with the wide-
angle diffuser
above out from the reflector head
• Hold the reflector card
and insert the wide-angle
diffuser
into the reflector head.
can bring out high-

Publicité

Table des Matières
loading

Table des Matières