Explanation Of Symbols; Safety Instructions - Dometic FlyTec FT100 Instructions De Montage Et De Service

Dometic FlyTec FT100
1

Explanation of symbols

A
NOTICE!
Failure to observe this instruction can cause material damage and
impair the function of the product.
I
NOTE
Supplementary information for operating the product.
➤ Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓ This symbol describes the result of an action.
Fig. 1 5, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2

Safety instructions

Please observe the safety instructions and stipulations issued by the
vehicle manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
 Faulty assembly or connection
 Damage to the product resulting from mechanical influences
 Alterations to the product without express permission from the manu-
facturer
 Use for purposes other than those described in the operating manual
NOTICE!
A
 If you do not have sufficient technical knowledge for installing
components in vehicles, you should have a specialist install the
flyscreen in your vehicle.
 Check whether the dimensions of the flyscreen fit your vehicle.
 Installation of the flyscreen requires two people.
EN
Explanation of symbols
17