switel WTC519 Mode D'emploi page 49

Putting the Walkie−Talkies into Operation
Before using the walkie−talkies for the first time, charge them for at
least 12 hours. When the walkie−talkies are connected correctly, the
− icon flashes in the display.
The current battery charge status is indicated in the display:
The battery pack needs to be recharged as soon as the indicator
flashes in the display and acoustic warning signals are issued.
Energy−save mode
Your walkie−talkies are provided with an energy−save mode to in-
crease the service life of the batteries. If no buttons on the walkie−
talkies are pressed for a period of 4 seconds, energy−save mode is
activated. Energy−save mode is deactivated as soon as you press a
button or a signal is received.
Attaching the belt clip
Slide the belt clip in the guide from the top until it audibly snaps into
place. To detach the belt clip, prize the fastening tab up a little with
your fingernail and slide the belt clip upwards.
Do not charge the walkie−talkies with charging units from
other manufacturers.
Full Empty
49