Publicité
Les langues disponibles
Les langues disponibles
Espresso Machine ES 90 / ES 91
process using a moist cloth.
However, let the pipe cool
down for a few moments as it
becomes very hot.
Also clean the milk frother noz-
‹
zle with a short blast of steam
so that the milk remnants are
blown out of the milk frother
nozzle.
note
You can use the method below
to practice frothing milk:
Put cold water into the milk
►
can.
►
Add a drop of detergent.
Froth it as described above.
►
►
If you froth correctly, the
mixture looks like real milk
froth.
►
Please do not drink this
mixture!!
Making hot water
Set a container under the hot
‹
water nozzle.
CaUTION
Never aim the hot water nozzle
towards yourself or any other
person. DANGER OF BURNS!
To move the hot water nozzle,
always use the handle; never
touch the hot water nozzle on
the pipe after using. It becomes
very hot!
Turn the control knob open.
‹
Hot water now flows from the
‹
nozzle into the container.
After completing the process,
‹
close the rotary control again.
Programming
This unit comes with the follow-
ing factory settings:
Single espresso – 30 ml
Double espresso – 60 ml
In the following section you can
also change them and set them
however you like:
Programming "Single Es-
presso"
Put the single-ply filter insert
‹
for 1 cup into the group handle
and fill it with coffee grounds.
Press down the coffee grounds
‹
firmly and insert the group
handle.
Put a cup underneath the
‹
group handle.
Press the "PROGRAM" button.
‹
Then press the "
‹
Press the button again when
‹
you have the desired amount
of espresso.
2 beeps inform you that the
‹
new setting for "single espres-
so" is programmed and saved.
© Gebr. Graef GmbH & Co. KG
EN
" button.
53
Publicité
