4.3 24-HOUR MEMORY SUB MODE
In the Altimeter mode, PRESS the [Select] button twice to enter this sub mode.
In the 24-hour memory mode (Fig. 27):
•
Field 1 displays the vertical ascent or descent rate;
•
Field 2 displays the current altitude in increments of 5 meters or 10 feet, depending on the unit of measure selected
; and
•
Field 3 displays the particular hour and to the left the text "memory".
•
The Outer Circumference displays graphically the altitude in hundreds of meters or feet over a full thousand where
one complete circle is equivalent to 1000.
To view the information compiled in the 24-hr memory:
1. PRESS the [-] button to scroll back down in increments of one hour and view the vertical ascent/descent rate and the
altitude for that particular hour.
2. PRESS the [+] button to scroll back up.
Note: Replacing the battery will not erase this information.
4.4 LOGBOOK SUB MODE
In the Altimeter mode, PRESS the [Select] button three times to enter this sub mode. In the logbook mode, nine summarizing
displays are shown. The displays automatically rotate showing the first display for 7 seconds then proceeds to show the
next displays at 4 second intervals.
In the first display (Fig. 28):
•
Field 1 displays the year;
•
Field 2 displays the text "LO" with the current logbook number flashing; and
•
Field 3 displays the month and day of the particular logbook number. To the left of the month/day, is the text "Log Book".
The user can PRESS the [-] to scroll down to view previous logs captured and then PRESS [+] to scroll up to view the
most current logbook.
33