Suunto ADVIZOR Mode D'emploi page 37

Note: In selecting the interval, the user chooses a) the time period for recording the altitude, the vertical ascent/descent
rate as well as the heart rate to be stored into the logbook and b) the timeout or maximum recording time of a logbook. The
shorter the interval the more accurate the information due to the fact the sampling rate is faster. Timeouts are discussed
below.
Note: If the logbook is recording, based on the interval chosen, the logbook will record up to that particular time period.
Once the time period has been reached, the Wristop Computer will alert the user that the logbook recording has expired
(known as a timeout). For setting the logbook interval refer to Setting the Altimeter on previous page.
The timeouts are as follows:
LOGBOOK INTERVAL
20 second
1 minute
10 minute
60 minute
9. At the desired interval, PRESS the [Mode] button to accept the changes and exit the setup program.
Once the user completes the process in setting the reference altitude of the current location to the known altitude, the
Wristop Computer will also correct the sea level pressure, and therefore, it will not be necessary for this function to be
set.
Note: If the user does not press any button for 1 minute in the setup mode, the display will automatically exit setup.
Note: A 10 minute recording interval means that the Wristop Computer records data every 10 minutes.
MAX. CONTINUOUS RECORDING TIME
10 hours
12 hours
7 days
10 days
31