Festool CTL 44 E Notice D'utilisation D'origine page 15

If foam or liquid escapes, stop work im-
mediately and empty the dirt container.
The fi lter bag has to be removed before evacuat-
ing liquids. We recommend use of a special wet
fi lter. When the maximum fi lling level is reached,
a bag-full indicator (2.12) automatically interrupts
extraction.
6 After fi nishing work
- Switch off the cleaner and pull the Plug of the
mains lead out of the Plug socket.
- Wind up the mains lead (2.6).
- Empty dirt tank.
- Clean the vacuum cleaner inside and outside by
suction and wiping.
- Deposit the appliance in a dry room, safe from
unauthorised use.
7 Maintenance and care
Always remove the power supply plug
from the socket before carrying out any
work on the machine.
All maintenance and repair work which
requires the motor casing to be opened
may only be carried out by an authorised
service centre.
A safety test is to be carried out at least once a
year by the manufacturer or an instructed person,
e.g. for possible damage to the fi lter and leaks
in the appliance, and to ensure that the control
devices are functioning.
If the user services the appliance, it must be dis-
mantled, cleaned and serviced, as far as possible
without any danger to the maintenance staff and
other persons. Appropriate measures include
decontamination before dismantling, locally fi l-
tered forced ventilation on the dismantling site,
cleaning the service area, and suitable personal
safety equipment.
8 Accessories, fi lter
The accessory and fi lter order number can be
found in your Festool catalogue or on the Internet
under "www.festool.com".
9 Disposal
Do not throw the power tool in your household
waste! Dispose of machines, accessories and
packaging at an environmentally responsible re-
cycling centre. Observe the valid national regula-
tions.
10 Warranty
For our tools, we give warranty for material and
production defects in accordance with the locally
applicable legal provisions, but in any case for at
least 12 months. Within the EU member states, the
warranty period is 24 months (verifi cation through
invoice or delivery note). Damage caused by, in
particular, natural wear, overloading, incorrect
handling, or damage caused by the operator, or
damage caused through use of the equipment con-
trary that specifi ed in the Operating Instructions, or
damage which was known at the time of purchase,
is not covered by the warranty. Furthermore, dam-
age caused by the use of non-original accessories
and consumable materials (e.g. sanding pads) is
also excluded. Complaints can only be recognised
if the tool is returned while still assembled to the
supplier or an authorised Festool Customer Serv-
ice workshop. Keep the Operating Instructions,
Safety Instructions, Spare Parts List and purchase
receipt in a safe place. Otherwise the respective,
current warranty conditions of the manufacturer
shall apply.
Note
Due to continuous research and development work,
we reserve the right to make changes to the techni-
cal content of this documentation.
REACH for Festool products, their accessories
and consumables
REACh is a European Chemical Directive that
came into effect in 2007. As "downstream users"
and product manufacturers, we are aware of our
duty to provide our customers with information.
We have set up the following website to keep you
updated with all the latest news and provide you
with information on all the materials used in our
existing products: www.festool.com/reach
15