Center Mount Hanger Adjustment; G.angle Adjustable Center Mount Footrest - Quickie QM-710 Mode D'emploi

Q M- 7 10/7 15HD/ 72 0
F. CENTER MOUNT HANGER ADJUSTMENT
(ASAP Seating only)
1. Removing the assembly
a. Remove the four screws (A) and slide the footrest assembly out of the receiver.
2. Footplate Height Adjustment
a. Remove the six securing screws (B).
b. Move the footplate up or down to the desired height.
c. Re-install screws (B) through adjusted holes and tighten the hardware.
49
3. Calf pad Adjustment
a. Remove the two securing screws (C).
b. Move Calf Pads to desired height.
c. Re-install screws (C) through adjusted holes.
G. ANGLE ADJUSTABLE CENTER MOUNT FOOTREST
1. Footplate Depth Adjustment
a. Remove the hardware(D) from the support frame tubes.
b. Move the footrest assembly forward or back for depth adjustments
c. Insert the hardware to lock the adjustment.; in place.
d. Re-tighten all hardware(D)
2. Footplate Angle adjustment
a. Press and hold both buttons(E).
b. Move the footrest /extension tube assembly up or down to set the correct angle.
c. Release the button and make sure the footrest clicks to lock.
3. Footplate Height Adjustment
a. Remove the hardware(F) from the hanger clamps.
b. Move the footplates up or down to set the correct height.
c. Re-tighten the hardware to hold the adjustment in place.
MK-100158 Rev. F
47
48
XI. DEALER SERVICE AND ADJUSTMENT
47 48 49
50
26
47
48
49
50