Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Visible and audible alarm indicators e.g. siren, strobe light ..., are connected to the output relays.
It is important to periodically ensure that these relays still function properly.
• To initiate a dynamic output relays test, disarm the alarm system.
• Enter USER CODE,
• Both timing and latch output relays operate for 5 seconds. Verify that all
alarm indications e.g. sirens, strobe light... are
• If an alarm indicator is not working, check the wiring and the device immediately.
• It is advisable to run this test on a monthly basis.
5.7
HAA263D: Technical specifications
Operating Voltage
Dimensions
Weight
Digital keypad HAA85WP
5.8
Refer to the user manual included with the HAA85WP MULTI-PURPOSE SECURITY KEYPAD - WATER-
RESISTANT.
5.9
Key switch (HAA80MK)
Refer to the user manual included with the HAA80MK REMOTE CONTROL PANEL SWITCH WITH
MOMENTARY KEY.
Use this device with original accessories only. Velleman nv cannot be held responsible in
the event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
04 (21/08/2014)
HAM263D
,
and
.
12VDC (provided by HAM263D)
117 x 117 x 27mm
220g
functional.
18
visible and audible
VELLEMAN
Publicité
Table des Matières
