Velleman HAM263D Mode D'emploi page 13

General status LEDs
EXIT/ARMED ON
OFF
Flash
AC POWER ON
Flash
Flash Alternatively
with Battery LED
BATTERY ON
OFF
Flash
Flash Alternatively
with AC power
LED
PROGRAM ON
OFF
PART. 1 ON
OFF
Flash
PART. 2 ON
OFF
Flash
FORCED TO ARM ON
OFF
Flash
Zone status LEDs
ON
OFF
Fast flashing
Fast flashing, 3x with
stopping interval
Slow flashing
Control key buttons description
There are 14 buttons for code entry and function confirmation
0 ~ 9
Numeric buttons for code entry
* # For function confirmation
HOME
For home mode arming and programming
BYPASS For (temporarily) bypassing zones while arming system
04 (21/08/2014)
HAM263D
System armed (whole system or one of the partitions)
System disarmed (the whole system)
System in exit delay period
AC power normal
AC power failure
System in Standby mode
Battery low
Battery normal
Battery under testing
System in Standby mode
System in programming mode
System in normal operation mode
Partition 1 armed
Partition 1 disarmed
During Exit Delay
Partition 2 armed
Partition 2 disarmed
During Exit Delay
System will be forced to arm if the faulty zone is not
cleared
System armed normally
System forced to arm with the faulty zone(s) bypassed
by the system
Zone abnormal
Zone normal
Zone was or still is in alarm mode
Zone was in alarm mode and is stored in alarm memory. System
is disarmed
Zone is bypassed
13
VELLEMAN