Battery - Sherco TY 12S Manuel Du Propriétaire

Battery

A
B
The fuse is located under the filter box, and the
following will therefore need to be removed:
- The seat (Seat Chapter).
Removal:
- Repeat the steps in the previous chapter until
the protective rubber
- Disconnect the wires:
-Remove the retaining rubber.
Refitting:
- To refit, proceed in reverse order to removal.
WARNING
C
For the first connection or replacement of the
battery, various display parameters need to be
configured. (Maintenance Sect.).
Deposit the "old" battery where it can be recycled.
is removed.
A
POSITIVE (red) .
B
NEGATIVE (black)
C
TIP
.
55 55