Gear Change; Braking; Parking - Sherco TY 12S Manuel Du Propriétaire

Gear change

Braking

Parking

The TY125 4-stroke gearbox has 5 gears plus the
neutral position.
To change the gears:
- Hold in the clutch lever.
- At the same time turn the throttle twist-grip
towards you.
- Press down the gear lever to select 1st gear.
- Release the clutch lever smoothly.
- Put the front of your foot under the gear lever
and lift it upwards to select 2nd gear and the
remaining gears.
Neutral position (N) can be found between 1st and
2nd gears.
To use the brakes correctly, apply the front and rear
brakes at the same time.
Use engine braking, without revving the engine, to
aid in braking more quickly.
ATTENTION
Avoid sharp braking that will lock the wheels and
may lead to falls.
Brake before not during bends.
- Apply the motorcycle brakes.
- Turn off the ignition using the ignition key.
- Shift the gear lever to 1st gear.
- Fold down the prop-stand onto a flat and firm
surface.
ATTENTION
The exhaust pipe and silencer will be hot after
running the bike so you should avoid contact with
these items.
Avoid parking in places with a risk of fire, such as
dry grass or flammable materials.
47 47