Control Devices And Controls; Clutch Lever; Front Brake Lever; Rear Brake Pedal - Sherco TY 12S Manuel Du Propriétaire

Clutch lever

Front brake lever

Rear brake pedal

Gear-change lever

42 42

Control devices and controls

A
The clutch lever is located on the left-hand side
of the handlebars.
The tension of the clutch is adjusted using the
screw (Maintenance Sect.).
The position of the clutch lever can be adjusted
by varying the position of the lever-light switch
assembly (Maintenance Sect.).
The front brake lever is located on the right-hand
side of the handlebars.
The tension of the brake cable is adjusted using the
tensioning wheel (Maintenance Sect.).
The position of the brake lever can be adjusted by
varying the position of the brake lever assembly
(Maintenance Sect.).
The rear brake pedal
right footrest.
The rear brake pedal is adjusted by varying the
position of the threaded shaft (Maintenance Sect.).
The gear-change lever is located in front of the left
footrest.
The TY125 4-stroke gearbox consists of 5 gears
and a neutral position.
To vary the position of the gear lever, see the Riding
instructions Sect.
is located in front of the
A